Choosinng Hypershift for White base like White Car / White Bike , or any other base having base white will require choosing pigments carefully , 

From our website the best high quality hypershift for white base are Aurora series , TR series , or 

Mid and lower range hypershifts like Kp white base interfernce  and AA series also works good , but requires higher quantity

Step-by-Step Method

How to Use Hypershift Pigment on White Base

STEP 1️⃣ Surface Preparation

1. Sand the surface smoothly (P800–P1000)

2. Clean with wax & grease remover

3. Ensure surface is dust-free and dry

✔ Smooth surface = clean glow
✔ Any scratches will be visible on white

STEP 2️⃣ Apply White Basecoat

1. Apply solid white / pearl white / off-white basecoat

2. Spray 2–3 uniform coats

3. Allow full flash time as per paint system

⚠️ Do NOT apply clear coat over the white base

STEP 3️⃣ Prepare Hypershift Mixture (VERY IMPORTANT)

Mixing Example (1 Liter Clear Binder)

• Hypershift pigment: 10-15 grams

• Intercoat clear / clear binder: 1000 ml

• Reducer: As recommended by system

✔ Add pigment slowly
✔ Mix gently by hand or low-RPM stirrer
✔ Let mixture rest for 10–15 minutes
✔ Filter through 125–190 micron filter

🚫 Do NOT grind
🚫 Do NOT high-speed mix

STEP 4️⃣ Spray Gun Settings

STEP 5️⃣ Apply Hypershift Layer

1. Apply very light mist coat

2. Allow 5–10 minutes flash

3. Apply 5-6 light coats
   

STEP 6️⃣ Top Coat

1. Allow hypershift layer to flash 20–30 minutes

2. Apply 2K clear coat – 2 coats

3. Optional third coat for extra depth & protection